| Customization: | Available |
|---|---|
| Type: | Composite |
| Usage: | Control Button, Start Button, Limit Button, Reset Button, Check Button, Control Switch |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Rated Insulation Voltage | Ui:250V | |||||
| Thermal Current | lth:3A | |||||
| Rated Voltage | 12V | 24V | 110V | 220V | ||
| Rated Operation Current | AC 50/60Hz | Resistive load | 1A | 0.5A | ||
| Inductive load | 0.7A | 0.5A | ||||
| DC | Resistive load | 1A | 1A | 0.2A | ||
| Inductive load | 0.7A | 0.7A | 0.1A | |||
| Contact material | Sliver Alloy | |||||
| Lamp type | LED Lamp(AC/DC) |
| Rated voltage | AC/DC6V,AC/DC12V,AC/DC24V,AC/DC36 V,AC/DC110 V,AC/DC250 V |
| Rated Current | 5~48V About 15mA;110~250V About 2mA |
| LED color | Red,Green,Yellow,Orange,Blue,White |
| Life | About 40,000 hours |
| Dropping Way | Inner resistance;Outer resistance when using 6V lamp |
| Lamp Circuit | Using AC/DC LED lamp,the terminal is have no difference of anode and cathode:Using inner resistance,do not need connect outer resistance. (Using 6V lamp when the lamp voltage is above 60V,and need connect outer dropping resistance.) |
| Operating Temperature | -25ºC~+55ºC(no freezing) Keep the air flowing around illuminated on pushbutton |
| Operating Humidity | 45~85%RH(no condensation) |
| Contact Resistance | ≤50mΩ |
| Insulation Resistance | ≥1000MΩ |
| Dielectric Strength | 2000V,AC 50Hz,5 seconds |
| Vibration Rasistance | 50Hz,Amplitude 1.2mm |
| Shock Rasistance | >10g |
| Solder Heat Resistance | 320ºC(or 30W soldering iron)no more than 2 seconds |
){kind=link}